We can supply different types of titanium fasteners at low price and high quality. Such as titanium bolts, titanium screws, titanium stud bolts, titanium nuts, titanium washers, titanium thread studs, titanium thread rods, titanium hexagon screws, etc., and can provide OEM service according to customer drawings. These titanium fasteners can be used in the chemical industry, racing bicycle and racing motorcycle industry, sailing and medical equipment, etc.
Titanium bolts-fasteners details
Characteristics Of Titanium Alloy Fasteners
(1) Small density. The density of titanium alloy is significantly less than that of steel, so titanium alloy fasteners are lighter than steel fasteners.
(2) higher than the strength. Titanium alloy is a common metal material with a higher specific strength. Using the advantages of high specific strength, titanium alloy can also be used to replace the lightweight aluminum alloy material. When the applied load is the same, the geometric size of titanium alloy parts is smaller, which can effectively save space. This concept of material utilization is of great significance to the aerospace field.
(3) High melting point. The melting point of titanium alloy is significantly higher than that of steel material, so the heat resistance of titanium alloy fasteners is better than that of steel fasteners.
(4) Small thermal expansion coefficient and elastic modulus.
(5) No magnetic. The magnetic permeability of titanium alloy is very small, almost negligible, so titanium alloy fasteners are non-magnetic, can effectively prevent the interference of magnetic field. Austenitic stainless steel is also non-magnetic, but subsequent cold processing will increase its magnetism, while titanium alloy hot or cold processing does not change its magnetism, which makes titanium alloy can be used in avionics equipment.
(6) High ratio of buckling strength. The critical strength standard for fasteners designed to withstand tensile loads is the yield strength, followed by the tensile strength because once the fastener has yielded deformation, it will lose its fastening effect. Compared with iron and steel materials, the yield strength of titanium alloy is close to the tensile strength, and the flexure strength is higher, so the safety of titanium alloy fasteners is higher.
(7) The electrode potential matched with the carbon fiber composite material. In fasteners, the important reason for the huge amount of titanium alloy is that the potential of titanium alloy electrodes matches that of carbon fiber composite electrodes, which effectively prevents the occurrence of galvanic corrosion.
(8) In addition, titanium alloy has excellent corrosion resistance, high creep resistance, and other advantages.
More Info
Our titanium bolts are Hot forged for higher strength, instead of Machined head. ZHUO HANG XIN focuses on supplying high quality Titanium Fasteners products to worldwide customers at competitive prices. Non-standard and special size is available according to your drawing or requirement.Chemical requirements (Nominal %)
Grade | N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti |
Gr 1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | bal |
Gr 2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | bal |
Gr 3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | bal |
Gr 4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | bal |
Gr 5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
Gr 7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
Gr12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
Mechanical requirements:
Grade | Tensil strength (min) | Yeild strength (min) | Elongation(%) | |||
ksi | MPa | ksi | MPa | |||
Grade1 | UNSR50250 | 35 | 240 | 20 | 138 | 24 |
Grade2 | UNSR50400 | 50 | 345 | 40 | 275 | 20 |
Grade3 | UNSR50550 | 65 | 450 | 55 | 380 | 18 |
Grade4 | UNSR50700 | 80 | 550 | 70 | 483 | 15 |
Grade5 | UNSR56400 | 130 | 895 | 120 | 828 | 10 |
Grade7 | UNSR52400 | 50 | 345 | 40 | 275 | 20 |
Grade9 | UNSR56320 | 90 | 620 | 70 | 438 | 15 |
Grade12 | UNSR53400 | 70 | 438 | 50 | 345 | 18 |
Fasteners Type:Titanium Bolts,Titanium Hex Nuts,Titanium Screws,Titanium Threaded Studs,Titanium Washers
Features:
1.Low Density and High Specification Strength
2.Excellent Corrosion Resistance
3.Good resistance to effect of heat
4.Excellent Bearing to cryogenic property
5.Non Magnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity
Applications:
Equipment accessories: Airplane, ship, bicycle, motorcycle, auto, medical, chemical, wheel, sports, anchor, weapon, etc.
Quality Guarantee: Forged Head improves superior strength, Rolled Threads to produce greater fatigue resistance and reduce galling Quality inspection conducted by QC before delivery Sampling inspection for Chemical composition and Mechanical properties like Tensile strength etc Dimension measurements like Thread size, Height of head, Depth of socket etc Related Certs for Chemical composition and Mechanical properties will be offered along with goods delivery. The wide range of titanium fasteners ZHUO HANG XIN stocks includes Titanium bolts, hex nuts, screws, threaded studs and washers, as well as additional sizes upon request. Various titanium fasteners is available in Natural, Blue, Gold and Purple. All kinds of the Metric bolts and also UNC&UNF bolt, torx for bicycle racing field, caliper bolts for all racing motorcycles are within our working range.
Zhuo Hangxin Metal is one of the leading manufacturers and suppliers of titanium fasteners in China. All popular titanium fasteners are of good quality and cheap price. Welcome to wholesale our factory stock quality titanium products.